Friday, July 10, 2009

Finishing the Empennage

Tad stopped by yesterday evening and we finished off the Vertical Fin. We used the pneumatic squeezer but had to modify the tip of our 'no-hole yoke'. it just wouldn't fit nicely past the existing rivets on the spar. We had to drill out a few rivets as they weren't setting nice and straight. After the modification to the yoke we didn't have any problems. Spent about 2hrs. finishing that off.
I continued on with a few rivets on the Horizontal Stabilizer. there are 200 rivets on the rear 'skin to spar' so i setup the squeezer and did about a 100. Tonight i finished those off and the two outward rib-to-spar rivets. only rivets left on the stabilizer are the 6 inward ones. plans call for a 4-6 but it looks a little short.
i'm going to leave those and let tad have a look.
So, except for those 6 rivets we've got two pieces done.

No comments: